Identifying industrial drainage assets and maintenance needs
Oil separators, silt traps, catchpits and attenuation systems do different jobs. The maintenance approach depends on the asset installed, what drains to it and where the system discharges.
- Asset details: manufacturer, model, capacity and drawings, where available.
- Drainage duty: the area or process served and the oil, residues, sediment or other contamination it may receive.
- Maintenance history: previous emptying or inspection, reported defects and recurring problems.
- Access and discharge: cover locations, connected drains, outlet arrangement and known discharge destination.
Technical sources for this library
The references below support the drainage, product and pollution-control information used in these guides. Manufacturer literature is specific to the product or system named and is not a specification for an unidentified installation. Regulatory guidance should be read within the jurisdiction and scope stated by the source.
Detailed guides
Stormwater systems
Attenuation inspection channels
Inspection channels are product-specific access routes within some attenuation systems. Their position and size govern which parts of the storage system can be viewed or reached.
Maintenance notes
- Manufacturer, system model and installed inspection-channel configuration.
- Channel locations, previous inspection findings and any recorded sediment build-up.
Get a quote
Stormwater systems
Attenuation tank access points
Attenuation-system access points should be identified from the as-built layout and manufacturer information. Their position defines where inspection or sediment removal can be attempted.
Maintenance notes
- As-built layout and the type and location of each access point.
- Previous inspection findings, material observed and the location of any flow-control component.
Get a quote
Drainage equipment
Drainage access covers
Drainage access covers protect openings while allowing access to the chamber or asset below. Safe opening depends on the cover condition, its lifting arrangement and the loading or traffic around it.
Maintenance notes
- Cover type, size, location and the asset below.
- Condition, opening arrangement and traffic or access constraints around the cover.
Get a quote
Underground drainage
Inspection chamber bases
Inspection chamber bases bring drainage branches through a defined channel layout. The branch arrangement is important when tracing restricted flow or sediment within the chamber.
Maintenance notes
- Chamber size and the number, direction and size of connected branches.
- Sediment, restricted branches and the condition of the chamber access.
Get a quote
Underground drainage
Rodding points
Rodding points give purpose-made access to a drain run. Their usefulness depends on their position, the direction of the pipe and the section of drain they can reach.
Maintenance notes
- Rodding-point location, pipe size and direction of the connected run.
- Affected drain section, current flow problem and previous blockage history.
Get a quote