Attenuation tank cleaning removes accumulated sediment from stormwater storage where access allows. We establish how the system was built before selecting the method. Concrete tanks, large pipe stores and modular crate systems provide different cleaning routes, so the reachable extent has to be established for the installation.
Attenuation Tank Cleaning
Attenuation tank cleaning for accessible stormwater storage, with sediment recovery and checks on inlets, outlets and cleaning limitations.
HomeAttenuation Tank CleaningAttenuation Tank Cleaning enquiry
Storage construction and sediment access
Silt can occupy storage space and restrict the route to a flow-control device.
Access and sediment recovery
Incoming water and the available working period are considered before sediment recovery starts.
Storage construction and sediment access
Silt can occupy storage space and restrict the route to a flow-control device. Modular systems may include designed inspection or cleaning channels, but that does not make every internal void accessible. We use the system layout and manufacturer guidance to plan suction and suitable flushing without damaging liners or internal components.
Discuss attenuation tank cleaning
Complete the form and we will get back to you.
Access and sediment recovery
Incoming water and the available working period are considered before sediment recovery starts. External cleaning methods are used where they can reach the deposits; any necessary entry into a suitable structure requires confined-space assessment, controls and emergency arrangements. Upstream catchpits are also relevant because a loaded silt trap can quickly refill a cleaned tank.
Storage, inlets and controlled outlets
We state which parts of the tank were cleaned and where access limited the result. Inlets and controlled outlets are checked where included because clearing storage alone may leave another restriction. Cleaning can recover volume lost to sediment, but it cannot increase the original design capacity or guarantee that the site will not flood.
For buried modular systems, we report the cleaning channels or other accessible parts actually reached. Wider voids that were not reached remain outside the stated coverage.
Attenuation Tank Cleaning: common questions
Can all attenuation tanks be entered?
No. Construction and confined-space risks determine whether entry is possible or appropriate.
Does emptying water remove settled silt?
Water removal can leave deposited silt behind; sediment recovery is separate work.
Will cleaning enlarge the available design capacity?
Cleaning can recover space lost to deposits but cannot enlarge the original design capacity.
Can every part of a crate tank be cleaned?
Access varies by system; the reachable extent must be established rather than assumed.
Should upstream silt traps be checked?
Yes. Continued sediment entering the tank can quickly undo the benefit of cleaning.